- WFT UTILITIES FOR MAC HOW TO
- WFT UTILITIES FOR MAC MAC OS
- WFT UTILITIES FOR MAC INSTALL
- WFT UTILITIES FOR MAC FULL
- WFT UTILITIES FOR MAC PASSWORD
The camera now takes a picture and the WFT-E1 springs to life after a second or so. Go back to Image transfer (LAN) settings and set the LAN type to Ethernet.Įxit the menu and press the shutter release of the camera. The settings file on the memory card will now be loaded into the WFT-Ex.
In the next menu, set the LAN setting number you want to configure, then select Load settings and OK. Select it, then select LAN Setting, then Set up. At the bottom, you should see a new menu entry Image transfer (LAN) settings. Click on the "Menu" button on your camera. Make sure you have connected the Ethernet cable to the hub/switch and the WFT-Ex. This file must be stored on a memory card which is then inserted into your camera. Chances are that if you have to do so, there will be someone who maintains the network and can tell you what settings you need.Ĭlick on "Save" to create a file called nprofile.nif. If you are behind a firewall accessing a remote server, you may have to enter proxy settings.
WFT UTILITIES FOR MAC MAC OS
I have not had any luck with an anonymous account on Mac OS and it is probably not a good idea anyways for security reasons. Note that the short login name is probably not the same as the long user name used in the "Sharing" settings, above.
WFT UTILITIES FOR MAC PASSWORD
The user name and password are your (short) login name and password. Since my camera is set to continuously generate new file names, this should not be a problem. I do not want anything to go AWOL, so I deselect the option to overwrite files. I suggest the "Public" folder, but you can choose anything that you can access using your account. Passive mode is easier to get through many firewalls, I always select it. Unless you use a non-standard port, you want to leave the port at 21. WFT-E1 Utility version 3.3 - FTP SettingsĮnter the IP address (or name, if you configured a DNS server in the previous tab) of the FTP server. The last (gateway) is only required if you want to upload to an FTP server that is not on the local network.Ī DNS server is only required if you do not want to use an IP address for the FTP server but rather a name. If you do not, you have to manually set an IP address, subnet mask, and gateway.
If your network has a DHCP server (usually your DSL router will have one built in) select "Obtain an IP address automatically". The following description is for the WFT-E1, but the others are similar with slightly more options. Start the application that is appropriate for the WFT-Ex that you have. If you don't want to use Ethernet, you have been warned.
WFT UTILITIES FOR MAC FULL
Using Ethernet until things work is much easier than going the full monty immediately and trying to get WLAN to work as well. Then make sure you have a free port on your Ethernet hub or switch and a cable. If you no longer have the CD, you can find version 3.3 here.
WFT UTILITIES FOR MAC INSTALL
) ) to connect to ftp://localhost/ using your short user name and login password to make sure the server works correctly.įirst thing is to install the Canon WFT-E Utility on your Mac. Terminal.app also works just fine if you know FTP commands. I suggest that you use an FTP client (I recommend the fine Interarchy or the free Cyberduck. You have now enabled the built-in FTP server that comes with Mac OS X. Make sure that you have read-write access to your Public folder. I disable all the other options (AFP is enabled by default).
Make sure you select "Share files and folders using FTP". System Preferences - Sharing Options on Mac OS 10.5 Then click on the button labeled "Options" to get this sheet: System Preferences - Sharing in Mac OS 10.5 Start "System Preferences" in your Apple menu and go to the "Sharing" settings: There is quite a bit of setup required to get things to work, but I believe it is well worth the effort. It is also possible to go through a WLAN access point, which is often better than connecting directly to the Mac, but that will be the subject of a follow-up post. This is a useful setup if you want to be highly mobile.
WFT UTILITIES FOR MAC HOW TO
The following instructions will walk you through how to set up both a Mac with an Airport connector and the WFT-E1 so that you can transmit photos directly to your Mac. You connect the WFT-E1 via either a Firewire (1D, 1Ds) or USB (5D) cable to the camera. The WFT-E1A is the North American version that only differs in the available WLAN channels from the rest of the world (WFT-E1). The WFT-E1 works with the 1D Mark II, 1D Mark II N, 1Ds Mark II, 5D, 20D, and 30D cameras, for example. There is also the option of connecting an Ethernet cable if you do not want or can not use a WLAN connection.Įach DSLR works with a different WFT product, so you will have to check which one is right for your camera. The Canon WFT-Ex/WFT-ExA range of products (currently E1.5) are wireless 802.11b/g transmitters that connect to Canon DSLRs and upload photos directly to an FTP server.
0 kommentar(er)
